Deploy Responce. Options

[Aro]

Hey.

Right, when you order a unit to deploy, they always seem to respong with "Deploying!", which is all well and good, however, in my mod, there is a Cyborg unit that deploys, and I don't want it to respong in a human voice if it's a cyborg, y'know?

How do i prevent one certain unit from responding to the deploy command?

[Dutchygamer]

yes bump, but you can add the keys DeploySound and UndeploySound to your deployed unit (the building) and have this way unit specific response/deploy sounds

Then just change DeploySound=27-I002 to DeploySound= as described above to avoid doubled sounds.

But then you won't have the respond when you press 'D', only when the deploying begins. Still, good find

[Lin Kuei Ominae]

in german the unit says "abtastung läuft" what means "scanning in progress" and this fits to the mobile sensor array only. So no problem for me if it doesn't says anything at all, because i have more than just a deploable sensor array.
I also moved this to the deploysound of the sensor array what makes it even more fitting imo.

Yep, also the way to add buildup sounds to your buildings

In this case BuildingSlam=PLACE2 and BuildingDrop=PLACE2 should both have PLACE2 removed.

Though there's one problem. Walls and placed buildings use both the BuildingSlam sound. So if you want building specific deploysounds you have to accept that the walls can't have a placing sound anymore. Because they don't have a buildup nor can they use a buildupanim or deploysound.

\EDIT
Another problem or maybe even feature is, that you can hear the buildupsounds of the enemy if you applied deploysounds direct on each building.

This post has been edited by Lin Kuei Ominae: Jun 25 2008, 10:39 AM