Fixing the Tunnels (****), Tutorial by dew_MaN Options

[Ixith]

this tutorial is obsolete, go HERE for a better one

Tutorial By: dEw_MaN
(Thanks to Wess for posting it up in my WIP map thread. Figured it would be nice to have it up as a tutorial to since that is what it is ya know. )

There is a long standing error in Final Sun editor with tunnels. Read on to find out how to fix that annoying error.

First: apply your tubes one set of three tube applied only not two sets.
This means you trace the tunnel tubes one time for each connection. This will make a total of three connections between to tunnels.

Second: open your map in notepad. Find the tube section. Turn off word wrap so the section look some thing like this.

[Tubes]
0=79,100,0,79,83,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,-1,-1,-1,-1=79,83,4,79,100,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,-1,-1,- 2=80,100,0,80,83,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,-1,-1,-1,- 3=80,83,4,80,100,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,-1,-1,- 4=81,100,0,81,83,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,-1,-1,-1,- 5=81,83,4,81,100,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,-1,-1,-

NOTE: I removed the (-1) so this can fit the page. So do not remove all of the (-1) or you may have problems.

In this sample if you look at the first two strings like this. This makes one tube. Each string is a one-way passage throw the tunnels. One for one direction and one for the return direction.

0=79,100,0,79,83,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,-1,-1,-1,-1=79,83,4,79,100,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,-1,-1,-

Now we will look at the part that is giving you the problem

0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,-1,-1,-1,-
4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,-1,-1,-

This part is it. If you cont the (0) then cont the (4) you will see that the (0) are sort by one (0). To correct this change the next (-1) to a (0) (or the number in your strange) final sun all ways make this mistake.

What you are looking at represents the direction numbers (represents by the numbers themselves) and the number of tile movements (represents by how many numbers shown in the string.) this part of the strings should look some thing like this after you fix it. You can see that the amount of numbers match.

0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,-1,-1,-
4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,-1,-1,-

Then you will need to repeat this for the next two sets of tubes.

NOTE: Do not use these string as a replacement, these are just samples. Do not cut the strings apart like this. This was only to make it easier to see the problem.

[Aro]

I TOLD YOU! That there was a thread on this somewhere! Cheer's Wess and Ix'.